Serving Missoula, the Bitterroot Valley and Western Montana Mon to Fri, 7am to 6pm  ·  (406) 207-2524
The bones of the house

Residential Framing Contractor in Missoula, Montana

Carpenters who frame additions, garages, ADUs and full remodels from the mudsill up, sized for Missoula snow loads and detailed so the framing inspection is a formality rather than a fight.

Framing is the part of the job Constructive Brothers cares most about, because everything that comes after depends on it. A wall that is out of plumb by half an inch turns into a cabinet run that will not close and a door that swings on its own. We frame with 2x6 exterior walls for R-21 insulation, set headers sized from the actual span and load rather than a guess, and lay out studs on 16-inch centers so drywall and siding land on solid wood. On remodels of older Missoula houses we also correct what previous owners did, from notched joists to bearing walls removed without a beam.

Missoula adds its own requirements. Roofs need to carry the ground snow load the city specifies, which means heavier rafters or engineered trusses with proper bearing and hurricane ties at every heel. Floors over crawlspaces in the river valley sit on soils that move, so we pay attention to beam pockets, post bases and a 6-mil vapor barrier on the ground below. If you are adding a second story to a 1950s ranch in Farviews or a garage with living space above it in Lolo, we coordinate with the engineer, pull the permit and frame it so the inspector signs off on the first visit. One crew, from mudsill to roof sheathing.

Framing labor and lumber in the Missoula area typically runs $22 to $45 per square foot of framed floor area, driven by lumber prices, roof complexity, engineered beams and whether the job is new construction or a remodel that requires shoring.

Get a Free Quote

Tell us about the project. A carpenter, not a salesperson, will get back to you within one business day.

No spam, no pressure. Prefer to talk? Call or text (406) 207-2524.

Why Us

Why Missoula Homeowners Choose Us for Framing

Sized for Montana snow

We do not frame a roof in Missoula the way it would be framed in Boise. Rafter depth, truss specs and header sizes all come from the local snow load, and we add hurricane ties and proper bearing at every truss heel so the roof is tied down as well as held up.

Old-house corrections

Houses from the 1900s through the 1970s in the University District and Northside often hide notched joists, undersized headers and bearing walls somebody removed for an open kitchen. We find those problems during demo, sister or replace the members, and put a real beam where one was needed.

Straight walls, easier finish

Our finish carpenters work behind our framers, so the framing crew has a personal reason to keep walls plumb and corners square. Cabinets hang flat and doors swing true because the studs and blocking were put where they belonged in the first place.

Inspection-ready the first time

We know what the City of Missoula and Missoula County inspectors look for, from nailing schedules on shear walls to fireblocking at every floor line and draft stops in the attic. Passing on the first visit keeps the schedule intact and keeps you from paying for a second trip.

Our Process

How a Framing Project Runs

Plans and engineering

We review your drawings or help you get a set made, then work with a Montana-licensed engineer on beams, headers and any point loads. Nothing gets framed from a napkin sketch.

Material takeoff and quote

We do our own lumber takeoff, price it with local yards, and hand you a fixed-scope number that covers framing labor, lumber, hardware and sheathing. Change orders only happen if you change the plan.

Frame and sheathe

The order is mudsill, floor system, walls and roof. We snap lines from the foundation, correct any out-of-square concrete before the first wall goes up, and sheathe with the nailing pattern the plans call for.

Framing inspection and handoff

We walk the inspector through the job, fix anything flagged on the spot, and leave you with a structure ready for mechanical rough-in. If we are also finishing the project, the same crew keeps going.

Recent Work

Framing We've Built

See More of Our Work →

FAQs

Framing Questions, Answered

Do you frame from plans I already have?
Yes. If you have architect or designer drawings, we build from those and coordinate with the engineer of record on anything unclear. If you only have a rough layout, we can connect you with a local designer or draftsman and get a permit-ready set produced. Either way we do our own takeoff from the plans so the quote reflects the actual lumber and hardware rather than a per-square-foot guess.
Can you remove a bearing wall in my older Missoula home?
Usually, with the right beam. Many 1940s to 1970s ranches in Lewis and Clark, Farviews and South Hills have a central bearing wall that owners want gone for an open kitchen. We temporarily shore the ceiling, install an LVL or steel beam sized by an engineer, carry the load down to new posts and footings, and patch the ceiling. The permit and engineering letter protect you when the house sells.
How does Missoula snow load affect framing?
It changes almost every structural size on the roof. Missoula's design snow load is well above what national span tables assume, so rafters and headers get deeper, and trusses have to be engineered for the heavier load. It also affects decks and covered porches, which have to hold drifted snow sliding off the roof above. We size everything to the local number and the engineer's letter, never to a generic chart.
Do you frame garages and ADUs as well as houses?
Yes. Detached garages, garages with a suite above, and stand-alone ADUs up to 1,000 square feet are common framing jobs now that Missoula and the state allow them on most residential lots. We frame from the slab or stem wall up, including trusses and sheathing, and can carry the project through siding, windows and finish if you want one crew for the whole thing.
Service Areas

Framing Across Missoula and the Bitterroot

Based in Missoula. One crew and one standard of work from Frenchtown to Hamilton, up the Blackfoot and over to Seeley Lake.

Related Services

Often Paired With This Work

Talk to the crew that frames it right

Free on-site walkthrough. A fixed-scope quote in writing. Work that passes inspection the first time.

Get a Free Quote